Seabed World Luminous Stickers Glow in the Dark Nemo Fish Dolphin Anime Wall Decals for Kids Room Bathroom Tile Home Decorations

Glow sticker

Sizes

As the below shown, the original size of the wall stickers received, only for reference!
Here might have a size deviation, but it don’t cause any bad effects on the pasting.
Here does not show the actual precise out-factory size of the sticker, but refers to the serial number of this wall stickers.
If mind, please be cautious to buy!

The similars

Real Photo

The original size of the received stickers, these are smaller stickers, the size as about A4 paper, the real photo shown as below:

Our Packing

Our Packing Method: The wall stickers is rolled up with a hard foam stick, and then packed into Opp bag.
Remark: This foam stick has about 30mm in diameter.
Considering the value of the goods itself, we have adopted this simple packaging method to avoid excess packaging, normally, it turned out to be safe in transit.
If you want us to take a more secure packaging method – rolled up with a hard paper tube, you will be required to pay an extra costs of packaging materials and shipping (shipping weight increased). So, please contact customer service to modify the value of the order.
Please Note: Since the PVC /vinyl film has elasticity, can be stretched or shrank, but the backing paper cannot. When the wall stickers was took out and unfolded, it might happen wrinkle. Don’t worry! this hasn’t a bad effect on the pasting, when installing, just use a hard card to press flatten.
Warm Tip: When receiving the packages, if the stickers is damaged in transit, please raise a dispute attaching some real photos to ask a refund, the reason of dispute is “Product arrived damaged”, not “xx are not as described” or “Defective”. And, if just because of this, it is hopeful not to leave us a negative feedback (below 3 stars)
Like this, as seller, we can do a claim on the logistics company.
And, it isn’t required to return the goods to the seller.
Thanks a lot for your understand and support!.

Scope of Applicable

Any smooth flat surface in which can be pasted; Such as 1- painted wall, 2- wallpaper, 3- ceramic tile, 4- plastic goods, 5- wood goods, 6- metal goods, 7- glass goods, and etc;
Excluded 1- off powder or peeled wall, 2- the pits or cracked metope, and 3- uneven surface.
Please see the below pictures shown, only for reference.

FAQ

Q: How to glow?

A: Luminous stickers makes the light energy storage luminescent powder as main raw material (No radiation bad effection).
The luminous powder is a phosphors, it can store up light energy under the light’s irradiation, such as natural light & fluorescence;
In the stop light irradiation, the light energy will be released slowly in the form of fluorescence way;
So at night or in the dark, still can see the light, even lasted for several hours to ten hours.
After received, do the best to make it on the outside to absorb light, do not have anything occlusion.
Can be luminous after just lighting, more light absorption, can be more bright and last for more long time!

Q: Can the wall stickers be reused?

A: Yes. But not recommended.

Q: Size error and color difference?

A: The actual size of the goods received may have an error of 1-3 MM. This is a normal phenomenon.
The color difference may be caused by some reasons such as color reflection in the monitor, lighting, background & etc. The color is subject to the real goods received. If just not like the color of the real goods received, please don’t leave a negative feedback of “Bad Quality”.
If mind, please be cautious to buy!

Q: Why is it that the stickers attached will peel off automatically slowly soon after, is it a quality problem?

A: The decorative films are mass-produced and have passed factory inspected, so it is not normal for several pieces of stickers to be poorly attached.
The possible influencing factors are as follows:
1/ Just coated surfaces with new paint, uneven surfaces, uncleaned surfaces (with dust or powder);
2/ Do not stick onto extreme cold or hot surfaces. Ideal temperature must be between 60°F & 90°F;
3/ Do not touch the adhesives by hands, the oils from your skin will prevent sticking;
4/ Before applying these decals, to make sure that there is no wax or oily products on the wanted surface;
5/ The stickers didn’t stick onto the wanted surface tightly, leaving gaps.
As the above, only for reference!

Pasting Matters Needing Attention

After received, please release it and keep flattening 1-2 days, until the stickers is restored flattening, and then paste, to avoid curling edge peeling;
Make sure that the pasting surface must be smooth flat clean and dry;
Before pasting, it is required to do testing on the surface that want to paste, to check over whether be applicable to paste this wall stickers;
When pasting a large area decal, pasting onto the wall surface while peel off the decal slowly to start from the edge corners;
If any bubbles, use a hard card to squeeze out, or a sharp small needle to puncture, and then press flat.
As the above, only for reference!